ROD Mill

Description

Features Simple and easy to operate. Ideal for both site and laboratory use. Electric motor to provide an effective rotating action. Easy to handle and easy to operate. Frame coated with world’s best and highest quality anti-corrosive, galvanizing zinc coating
Volume Feeding volume: approximately 40-45 Liters on liquid basis as required
Dimensions of the mill Dimeter of the cylinder 12 inch Dia x 24 inch or as per requirement and adjustment
Shell Cylindrical shell flanged at both ends for opening of shell. Grooves or gear arrangement or plain sections for adjustment of belt or chains for rotation of shell. End of flanges are fitted with flanged sections which can be made open by easy nut and bolt arrangement.
Discharge Chute Flanged or easily fixed movable discharged head / chute for removal of fine grinded material. Separate moveable discharge hopper can also be provided.
Feed Chute Flanged or easily fixed Feed side head / chute for addition of feed material
Rods 174 PH annealed stainless steel rods or any other equaling material of same grade and properties
Frame Frame will be of solid high grade Mild Steel (MS) or carbon steel (CS) which is a Plain-Carbon Steel, the most common form of steel having carbon in the range of 0.12 – 2.5 % or or Iron (Fe) which makes it better choice for fabrication or Stainless Steel (SS) (if required).
Rubber mats Rubber mats to reduce influence of vibration on the machine and noise level.
Power Requirements Motor 1 Hp Voltage 220 V and 50 Hz frequency Single Phase will be mounted.
Applications Application: for fine grinding of different grades of coal, Bio mass, metallurgical, mining, liquor, pharmaceutical, chemical agriculture, food, grain, cement, coal, geology, explosives, sulfur, quartz, feldspar, carbonate, spices, coffee grinds, coffee beans, pulverized coal, sand, cement clinker, chemicals, coffee, construction materials, fertilizers, fillers, flours, grains, metals powders, minerals, nuts, plastics, sand, seeds, soils, washing powder, agriculture, biology, chemistry / plastics, construction materials, engineering / electronics, environment / recycling, food, geology / metallurgy, high degree of corrosion resistance and easy cleaning excellent product quality due to extensive optical inspection.
Anti-corrosive

(Cold Galvanizing) Zinc Coating

World’s best & highest quality anti-corrosive, cold galvanizing zinc coating would be applied on Piping / Tubing network after the installation with ‘USA’ originated brand named ‘ROVAL’ which has as high 96 % zinc content in its dry film thickness. ROVAL exhibits the anti-corrosion performance equivalent to that of hot-dip galvanizing which is true for protecting the metals from corrosion for a long time. This process is called “cold galvanizing”. For over 50 years, ROVAL has been used for newly fabricated ferrous materials and also for restoration and repair of old worn galvanized materials and all type of ferrous materials in lie of zinc plating, and also as anti-corrosion paint for steel and metals.

Reviews

There are no reviews yet.

Be the first to review “ROD Mill”

Your email address will not be published.